Trimble SNS © Copyright 2017, Trimble Inc. For more information visit www.trimble.com
×
Menu
  • SNS Vibe Quick Reference
Trimble TMX-2050 display with Trimble SNS Vibe system -
Quick Reference
 
Run Time Display
 
SNS Vibe Quick Reference
 
1

GNSS Status

1. GNSS Status
Swipe down to show GNSS status:
 
 
 
2

Precision Tolerance

2. Precision Tolerance
Indicates current horizontal and vertical precisions in relation to defined precision tolerances that have been set:
 
3

Perspective

3. Perspective
Toggle the screen perspective between Overview or Chase views 
4

Widgets

4. Widgets
Displays a list of widgets available to add to the run screen
5

Screen Orientation

5. Screen Orientation
When in map display, allows user to configure screen orientation (north up or  vehicle up)
6

Line/Point Steering Indicator

6. Line/Point Steering Indicator    
Indicates which direction to steer when navigating a line along with distance from centerline, or in the case of a point, distance in-line and cross-line to steer (relative to current reference azimuth).
 
7

Start/Stop Navigation

7. Start/Stop Navigation
Begin or end navigation along a line or to a point. If no target selected, user will be prompted to select one in Targets drawer
8

Right Drawer

8. Right Drawer
Tap to display right draw where you will access your route lines or target points.
9

Left Drawer

9. Left Drawer
Tap to display right drawer. This will list all layers available for display and project settings
10

Zoom Controlos

10. Zoom Controlos
From left to right, select last view, zoom out, zoom in, zoom to vehicle, zoom to extents.
11

Tablet Navigation

11. Tablet Navigation
 
Back: Tap to return to previous view
 
Home: Tap to return to the Home screen
 
Recent: Tap to view recent apps visited
12

Camera

12. Camera
Tap to take a screenshot when a USB device is attached
 
 
GNSS SETUP
 
 
1) Tap   and then select GNSS Setup. The GNSS Setup panel will display
 
2) Select the Antenna Type, the Correction Source & define the Precision Thresholds and then tap NEXT
 
4) In the SETUP tab, configure the specific Correction Source settings
5) Tap SAVE to finalize the GNSS Setup changes
 
 
 
 
TRIMBLE SNS VIBE SYSTEM HARDWARE
 
 
 
For more support, see the User Manual located in the SNS Settings menu, or contact support@trimblesns.com.